Nail drill bit DARK Brunka (Green)

Bud bit (Bud-shaped bit) will help to carefully and quickly work in hardware and combined pedicure techniques, grinds rough skin, callosities, and calluses.

Suitable for beginners as well as for experienced manicure masters.

• Withstand dry heat processing;
• Do not rust during sterilization;
• Have uniform diamond spraying;
• Will help to carefully and quickly perform manicure and pedicure in hardware and combined manicure/pedicure techniques;
• Resistant to temperature, moisture, and steam;
• Diamond particles are additionally sieved, therefore they have the same geometric shape and are ideally uniformly sprayed onto the bit;
• The base of each bit is checked for radial runout;
• The spraying is checked under a microscope.

Green notch: Suitable for pedicure work, for processing lateral ridges and nail corners, roughening, calluses, and cracks; the shape resembles an elongated bud or a drop, which allows for careful work with hard-to-reach areas.

Recommendations for use:

• Rotations: 10–20 thousand for devices with power of 30–65 watts;
• Disinfection: disinfecting solution or a special solution for processing bits;
• Sterilization: autoclave or dry heat, necessarily pre-drying on the drying mode in a dry heat/UV lamp for tool storage or just in the air (in a separate clean area) for at least 6 hours.

We do not recommend cleaning diamond bits with metal brushes, it is better to use a plastic brush with stiff bristles.